Comments on: How to replace screen inverter in Compaq Presario v2000

By: Trevor Spidell

Trevor Spidell — Tue, 29 Sep 2015 03:16:31 +0000

Hi I was wondering if you could do a teardown of a Compaq Presario V5308CA laptop.
Thanks

By: berka

berka — Thu, 12 Mar 2015 08:33:15 +0000

please i’ll like know the polarities of input of the inverter presario v2000

By: Hogdoodie

Hogdoodie — Wed, 01 May 2013 00:38:33 +0000

Very clear and precise steps. Best I have seen so far. Well done, keep these coming

By: t l

t l — Thu, 27 Dec 2012 00:06:17 +0000

Thanks totally helpful!!!!

By: abhi

abhi — Tue, 25 Dec 2012 14:11:28 +0000

after removing screen i am facing “wifi very low strength” problem.any solutions. (i am using monitor for display)

By: hermit

hermit — Sat, 29 Sep 2012 03:46:08 +0000

Thanks for your nicely done instructions! I have an HP Pavilion ze4900 Laptop with, I believe, a video cable problem. Both your compaq and my HP apparently are using the same LCD Display part. By viewing your intstructions, they are close enough, that when I get the video cable I ordered from Ebay, I should be able to now take apart my screen display and swap out that cable. My Service manuals tell me everything nearly about the computer, but do not tell me how to take apart the display that’s attached…only how to remove the entire display from the laptop. Thanks again for your input and the detailed instructions complete with pictures!

By: IML Tech

IML Tech — Mon, 23 Jul 2012 19:08:52 +0000

In reply to James. @ James, Some kind or grounding issue? If you cannot resolve it, just glue the inverter to the cover with double sticky tape. ;)

By: IML Tech

IML Tech — Mon, 23 Jul 2012 18:41:21 +0000

In reply to Jeman. @ Jeman, Most likely this is LCD screen failure. It's necessary to replace it.

By: Jeman

Jeman — Mon, 23 Jul 2012 05:19:37 +0000

Got an Aspire One D270 netbook and it has a thin white vertical line at the center of the screen when the netbook is turned on. Please advice how to get this line out.

By: James

James — Sat, 21 Jul 2012 19:42:55 +0000

I’ve got an odd problem with a Compaq V2000 Laptop. I’ve replaced the LCD Inverter and the LCD screen now works again.

Here’s the problem, if I screw the Inverter down the LCD stops working. If I detach the Inverter then the LCD starts working again. I got a 2nd Inverter and it does the same thing. I have 2 of these Compaq V2000 Laptops and I’ve replaced the Inverter on the other one in the past with no problems. Does anybody have any ideas why the Inverter will not work when attached with the single screw?