Comments on: How to replace screen on HP Pavilion dv6

By: JIM

JIM — Thu, 12 May 2016 20:25:58 +0000

I am rebuilding the dv6-1360us. I have tried 2 different screens (LED, no inverter), that work fine on other units. But I have no backlight. You think it’s just a cable?

By: DelKehler

DelKehler — Sat, 07 Nov 2015 14:59:00 +0000

MY HP Laptop one of the hinges broke , when I open the laptop the side corner of the laptop comes apart , disconnects the screen , the screen is black how can I fix the problem, Is thecable disconnected?

By: asad

asad — Sat, 07 Nov 2015 06:10:03 +0000

Hi, My screen for no reason has developed black spot on top left corner. I tried to massage it and it has somewhat faded to dark green but its still there. Some part of the left side is also developing thin lines of 1 inch or so length. What seems to be the problem ? do I have to replace whole screen. Mine is HP pavilion Dv6 Core i5. Your advise please. Thank you

By: Art

Art — Sun, 06 Sep 2015 21:12:40 +0000

I have an HP dv6-2150us, which is physically damaged. It works fine, but the screen is hanging by a thread and only appears to be attached on the right side. The mounting hardware appears to be broken as one piece which still has two screws in it has a jagged break at the top. Is there any way of repairing this?

By: IML Tech

IML Tech — Sun, 26 Oct 2014 17:52:45 +0000

In reply to Paulo Ferreira. @ Paulo Ferreira,

I have a hp dv6-1260ep and the backlight on my screen broke, so I have to change it.

This laptop has a LED backlit screen. If the backlight stopped working, you'll have to replace the entire screen.

By: Paulo Ferreira

Paulo Ferreira — Fri, 24 Oct 2014 14:27:14 +0000

Hi. I have a hp dv6-1260ep and the backlight on my screen broke, so I have to change it. Do you know if these instructions adapt to my model? Thanks!

By: IML Tech

IML Tech — Wed, 03 Sep 2014 15:45:37 +0000

In reply to Renee. @ Renee, Did you disconnect the hard drive while replacing the screen? If you did, make sure it's connected properly.

By: Renee

Renee — Tue, 02 Sep 2014 20:52:21 +0000

I followed the instructions and replaced my screen, and the new screen seems to be working fine but now I am getting a failure to boot message. Would this be because I changed the screen? Any ideas on how to fix that?

By: Magan

Magan — Mon, 25 Aug 2014 14:13:40 +0000

My screen broke, and I was trying to tell which disassembly instructions of yours that I should use before I take apart the display assembly. My computer says “Version: 6.3.9600 build 9600”. Can you tell me if you cover this version in any of your guides?

By: Simon

Simon — Sun, 03 Aug 2014 22:11:08 +0000

I wanted to thank you for this guide, real amazing effort and extremely helpful. I came home one night to find my screen had a vertical line of dead pixels and needed a new screen. Used this tutorial from start to finish, had zero problems replacing and everything is fixed. Keep up the great work.