Comments on: How to replace broken screen on HP Pavilion dv3

By: Innocent Hillary

Innocent Hillary — Tue, 01 Sep 2015 17:08:29 +0000

Thank bro for your info……….

By: Tarak Majumder

Tarak Majumder — Fri, 21 Jun 2013 12:24:35 +0000

Your information huge help me..thank you very much.

By: Jack Thomas

Jack Thomas — Wed, 05 Dec 2012 01:10:59 +0000

Before I begin this process I need some additional information. firstly, I’m not convinced my screen is the actual problem. My screen frequently flickers. Often when I adjust the position of the screen the problem is temporarily corrected. This leads me to believe there may just be a faulty connection. this guide helps me get to the video cable connection on the screen, can you provide instructions for accessing the video cable where it attaches to the video card. thanks so much in advance.

By: IML Tech

IML Tech — Wed, 01 Feb 2012 16:52:29 +0000

In reply to Ashley. @ Ashley, LED screens do not need an inverter.

By: Ashley

Ashley — Fri, 27 Jan 2012 20:40:56 +0000

I had a question about the inverter. My screen for my dv3-2000 crack after a fall and I bought and replaced it just fine. The problem is that the new one does not light up when every is installed back. It functions as it once did just the backlight to the screen does not work. Above you said your dv3 didnt need to be supported by an inverter, is that the case for mine? I have a 13.4-inch WideScreen (11.65″x6.54″) WXGA (1366X768) HD Glossy LED.

By: rs salazar

rs salazar — Sat, 25 Jun 2011 16:04:03 +0000

Thank you for this helpful instruction, it saved me money! I made a donation to help your cause.

Bob