Comments on: How to disassemble HP Pavilion tx2000 Tablet PC

By: mario

mario — Sat, 14 Feb 2015 17:34:08 +0000

como posso entrar no setup do hp pavilion tx 2000

By: IML Tech

IML Tech — Mon, 02 Feb 2015 15:57:51 +0000

In reply to Hien. @ Hien,

I lost my cmos battery do you know what the model of the battery is?

I believe this laptop has a coin type battery (CR2032) and Maxell ML1220 should work.

By: Hien

Hien — Sun, 01 Feb 2015 22:33:05 +0000

I lost my cmos battery do you know what the model of the battery is?

By: ÑŽÑ€Ð¸Ð¹

ÑŽÑ€Ð¸Ð¹ — Sun, 10 Aug 2014 12:04:35 +0000

By: IML Tech

IML Tech — Thu, 12 Jun 2014 19:07:54 +0000

In reply to Jesse Carroll. @ Jesse Carroll, I'm not sure if you can fix the internal wireless card. From my experience, when the video chip starts failing, the internal wireless also fails. Probably you can use an external USB wireless card, it's not very expensive.

By: Jesse Carroll

Jesse Carroll — Tue, 10 Jun 2014 14:34:15 +0000

OK, I’ve restored my video with a hair dryer.

But LOST my WiFi, which has been working.

NOT a Broadcam card issue, I put in a second one to no avail.

Also my tx2000 will not boot past the GRUB, on Battery power.

Boots fine from AC.

This machine was only $22 ( with power brick) in the thrift store a couple weeks ago.

Missing HDD and caddy.. and one stick of RAM.

Now have $41 in itâ€¦

Help!

By: Mark

Mark — Sat, 27 Jul 2013 00:59:56 +0000

Fantastic and very generous tutorial. Thank you so much. I, Like many posters above have been helped greatly by your generosity.

Again, thank you!!
Mark

By: jorge

jorge — Sat, 20 Oct 2012 17:27:02 +0000

By: jb

jb — Tue, 14 Aug 2012 01:46:11 +0000

I kicked in $10 for the help. I can only suggest that you give a little more detail on removing the hinge cover and then the LCD cable. The hinge cover didn’t come off easily and I thought it would snap; the LCD cable has a pull-tab at the top that makes it much less stressful to extract. Anyway, I agree with above poster that this walkthrough helped lower my overall stress. Too bad cleaning my fan n heatsink didn’t really help too much… I might need a new fan I guess.

By: rd950

rd950 — Sun, 13 May 2012 20:07:02 +0000

Help!! On step 15 I plugged out the cabble on the left and it pulled the whole thing out eve the cap thing its soppuse to go inside of, I bassically dmged all the pind on the left. When I turn on the computer it beeps 3 times the buttons on the screen light up but the monitor doesn’t. I tried connecting an external monitor to the computer and it doesn’t work either. HELP!!