Comments on: How to disassemble HP 530

By: Sendman

Sendman — Thu, 14 Jul 2022 03:41:43 +0000

Absolutely great!
I followed your steps to clean my notebook including the fan after 10 years. Now all works perfectly.
Only one tip before you start!
Prepare something where you can put in all the tiny screws for every step. I used 16 caps from water bottles, glued them on a card and numbered them from 1-16.
So every screw gets back on the right place.
Hope this is useful for you
Greetings Sendman

By: Maluwa

Maluwa — Mon, 27 Apr 2020 20:23:28 +0000

Awesome, i was frustrated with my display inches was broken iand i did not know how to open front cover bot with your tutorial, i have made it.
Thanks

By: Alenson

Alenson — Fri, 18 Dec 2015 17:49:12 +0000

Hp510 casing broken @ hinges, how can i fix it.

By: akash

akash — Sun, 05 Apr 2015 08:59:21 +0000

sir my HP 530 laptop is just broken in outside of folding.. and then I start my laptop but screen is not view… pls help

By: Joe Dunn

Joe Dunn — Tue, 06 Jan 2015 09:24:14 +0000

Hi. Hope everyone had a enjoyable & safe holiday season!

Great detailed instructions. Is it possible to replace the plastic left side & right side mousepad button caps. My pad works fine – button below the plastic caps work fine. Both caps are beginning to split – can see hair line cracks beginning to spread with more use.

I’ve replaced numerous key caps and retainer clips over the past couple of years – would like to do this for these 2 button caps.

Danke!

By: IML Tech

IML Tech — Sun, 21 Dec 2014 17:32:06 +0000

In reply to benjamin. @ benjamin, The sound card built into the motherboard. You cannot replace it.

By: benjamin

benjamin — Sat, 20 Dec 2014 07:19:38 +0000

how can i replace my sound card an where can i find it on the laptop’s motherboard`
comp model hp 510

By: yuvraj

yuvraj — Wed, 03 Dec 2014 10:58:28 +0000

I want to change screen of my HP530 laptop. Where can I buy that and for how much cost? Also suggest which guide book to use to replace it by myself. I live in India.

By: IML Tech

IML Tech — Tue, 02 Dec 2014 07:05:23 +0000

In reply to feardha. @ feardha, No you cannot do that. You'll have to go though all disassembly steps 1-13. Only after that you'll be able to access and replace the CMOS battery.

By: feardha

feardha — Tue, 02 Dec 2014 02:04:24 +0000

what if I just want to replace the CMOS?

can I unscrew those on the step 10 and release the bottom cover?

I don’t want to mess up too much, dad’s property 😀