Comments on: How to disassemble Dell Inspiron N5030, N5020 or M5030

By: IML Tech

IML Tech — Sun, 01 Jan 2023 02:18:12 +0000

In reply to Candy. You are welcome. Glad to help.

By: Candy

Candy — Sat, 31 Dec 2022 06:58:17 +0000

In reply to Bryce. Thank you so very much for this tutorial. YouTube does not even come close to the detail that you present here. By following your instructions I was able to replace my keyboard in about 17min.

By: FELIPE

FELIPE — Fri, 04 Dec 2015 00:39:31 +0000

Thanks a lot for your work and help, so useful

By: prakash

prakash — Thu, 07 May 2015 01:50:54 +0000

sir dell inpior N3050 but key pad lock system will not work what can i do

By: Christian MÃ¼ller

Christian MÃ¼ller — Wed, 18 Feb 2015 17:48:38 +0000

Be careful to use the right tools so that the screws are not damaged.

By: Dave

Dave — Sat, 20 Dec 2014 02:34:22 +0000

Excellent guide. One addition: The screws on the bottom of the N5030 case come in TWO lengths. Two are much shorter than the rest. Make sure you get the shorter screws in the correct holes.

I was able to replace my GF’s HD in less than 30 min.

Thanks.

By: jessica

jessica — Mon, 01 Dec 2014 18:10:06 +0000

I have taken my inspiron N5O30 apart now the power strip on the inside has came away from the top of the keyboard and I don’t know how to fix it.I have tried a heat gun but been unsuccessfully at putting it back on my computer won’t turn on.

By: gaddora

gaddora — Sun, 09 Nov 2014 20:24:35 +0000

thank you very much

By: MBULWE

MBULWE — Thu, 28 Aug 2014 17:38:31 +0000

hi,my dell m5030 keyboard is somehow misconfigured .l opened the laptop to put in a new cpu but i sort of fitted the keyboard reborn cable wrongly and the laptop stopped booting untill i tried powering it without the keyboard and it booted.lt seems l somehow was shorting it.finally i fitted the cable properly only to find that the input is not exactly corresponding to the pressed key and hence i cant punch in my password.l am stuck what should l do?is it something to do with the motherboard or the key board?should i resit something?

By: Jan Newton

Jan Newton — Wed, 20 Aug 2014 17:01:32 +0000

Oh boy have I had trouble with Step 7. How do I get anything in through the Laptop to replace the ribbon connector? Do I take off the keyboard layer to enable this although still looks difficult. Please Help with whatever tools you may have used to get in!! Many thanks.