Comments on: Complete disassembly of Lenovo Y50-70 model 20378

By: IML Tech

IML Tech — Sat, 04 Jan 2020 03:33:15 +0000

In reply to Ibrahim. The webcam cable is a part of the display cable harness. It's necessary to separate the display panel from the laptop base in order to replace the cable/harness. You'll have to disassemble the laptop as shown in the step 18. After that you can remove screws from the display hinges and separate the display from the base. When the display is removed, you take it apart and replace the display harness with the webcam cable.

By: Ibrahim

Ibrahim — Sat, 04 Jan 2020 02:56:53 +0000

In reply to IML Tech. Is there a replacement steps anywhere online?

By: IML Tech

IML Tech — Sat, 04 Jan 2020 02:49:04 +0000

In reply to Ibrahim. If you are asking about the cable inside the display panel, along the left side of the LCD screen, it's the webcam cable.

By: Ibrahim

Ibrahim — Sat, 04 Jan 2020 02:29:51 +0000

What is the harness that is aligned along the upper case of the laptop? Is it the camera. Because I tore mine in half by mistake?

By: Evelyn

Evelyn — Sun, 13 Jan 2019 03:14:11 +0000

@ Elia ^ that probably is from the upper case, screen bezel 🙂 there should be two tiny magnets, one on top and one on bottom. You should be able to google pics for where

By: Elia

Elia — Fri, 26 Oct 2018 08:58:04 +0000

Hi! A small piece of magnet fell off while disassembling a lenovo y50-70 for keyboard replacement. I guess it’s needed by the lid closure sensor but I cannot figure out where it was positioned. Any ideas?