http://www.insidemylaptop.com/laptop-backlight-ccfl-lamps/ Do-It-Yourself laptop and notebook repair tips and tricks Mon, 06 Sep 2010 16:13:46 -0700 http://wordpress.org/?v=2.9.2 hourly 1 http://www.insidemylaptop.com/laptop-backlight-ccfl-lamps/comment-page-1/#comment-47719 michael Sat, 01 May 2010 14:58:45 +0000 http://www.insidemylaptop.com/laptop-backlight-ccfl-lamps/#comment-47719 pls help i have a toshiba laptop Sat L350 the screen was broken , i need to replace the screen, i purchased one off ebay i check the spec, model etc: to get the correct one , when i fitted it and started the laptop i could not see the welcome menu, only see small about of the background, then i assumed it the inverter, so i purchased that one too off ebay , connected that to this time i got a hissing and static sound from the right hand side speaker , but i was still not able to view the icons on display... pls advice would could be the problem ... PLS HELP pls help i have a toshiba laptop Sat L350 the screen was broken , i need to replace the screen, i purchased one off ebay i check the spec, model etc: to get the correct one , when i fitted it and started the laptop i could not see the welcome menu, only see small about of the background, then i assumed it the inverter, so i purchased that one too off ebay , connected that to this time i got a hissing and static sound from the right hand side speaker , but i was still not able to view the icons on display… pls advice would could be the problem … PLS HELP

]]> http://www.insidemylaptop.com/laptop-backlight-ccfl-lamps/comment-page-1/#comment-133 IBM ThinkPad screen went blank >> Inside my laptop Tue, 19 Feb 2008 05:38:22 +0000 http://www.insidemylaptop.com/laptop-backlight-ccfl-lamps/#comment-133 [...] Here’s what you can try: 1. Check the display close switch - a small button located close to the left hinge. Make sure this switch moves up and down without any problem, try tapping on the button. When the button gets stuck in the “closed” position, it cuts off power from the inverter board and the screen will be black. Tapping on the display close switch can help to turn the screen back on. 2. Try reseating connectors on the inverter board. [...] [...] Here’s what you can try: 1. Check the display close switch – a small button located close to the left hinge. Make sure this switch moves up and down without any problem, try tapping on the button. When the button gets stuck in the “closed” position, it cuts off power from the inverter board and the screen will be black. Tapping on the display close switch can help to turn the screen back on. 2. Try reseating connectors on the inverter board. [...]

]]>