
In this guide I will be taking apart a Sony Vaio VGN-SZ series laptop. In my case I’m working with a Sony Vaio VGN-SZ330p laptop but the guide should work for the entire VGN-SZ line.

In this guide I will be taking apart a Sony Vaio VGN-SZ series laptop. In my case I’m working with a Sony Vaio VGN-SZ330p laptop but the guide should work for the entire VGN-SZ line.

In the following guide I will remove and replace the power board in an Acer TravelMate 3260 series laptop. Most likely my guide will work for some other Acer TravelMate laptops but I don’t know all models. If this guide fits your laptop, please mention the model number in comments after the post.
In Acer TravelMate 3260 laptop power from AC adapter goes to the motherboard through the power board. When the power board goes bad, the laptop stops working at all and appears to be dead. In order to get access and replace the power board we’ll have to disassemble the entire laptop.

In this guide I will help you to remove and replace the cooling fan in a Dell Latitude D600 laptop. The cooling fan in this model is buried deep inside the laptop under the top cover. Also you can use this guide for cleaning the cooling module and removing dust from the heat sink and fan.
If your laptops shuts down on its own without any warning, most likely it happens because of overheating. Make sure the cooling fan works and the heat sink is not clogged with dust. Replace the fan if it failed or clean the heat sink if it’s clogged.
Before you start, turn off the laptop, unplug the AC adapter and remove the battery.
When you are replacing the cooling fan, it is not necessary to remove memory, hard drive, wireless card or optical drive. I did that only because I was upgrading the laptop.

In this guide I explain how to disassemble Sony Vaio TZ series laptops in order to remove and replace the hard drive. As an example I took a Sony Vaio TZ130N laptop (Model: PCG-4L3L). In this little laptop the hard drive is buried deep inside the case and we’ll have to disassemble the whole thing apart.
I assume that my guide will work for the entire Sony Vaio TZ line of laptops. If it works for you, please mention the model number in the comments below.
Do not forget to turn off the laptop and remove the battery. Work in static-free environment.

In the following guide I will take apart a Dell Vostro 1510 notebook. You can use this guide for removing almost all internal parts from the notebook base. I think these instructions might work for some other Dell Vostro notebooks, not just a Vostro 1510. If it fits your laptop, please mention the model in the comments below.

In this guide I explain how to disassemble a Compaq Presario F700 notebook. The guide might work for some other Compaq and HP models. I think the disassembly steps will be very similar for Compaq Presario F500 and HP G6000 notebook PC. If this guide works for your notebook, please mention the model name in the comments below.

In this guide I explain how to disassemble a HP Compaq 6730s – 6735s notebook and remove the cooling fan which is mounted under the motherboard. Basically I will take the whole notebook apart and remove all internal components one by one.
Why wouldn’t HP make a door for the cooling fan? Why should it be so complicated to replace the cooling fan?
Let’s start to disassemble the notebook.

In this post I explain how to replace or upgrade memory (aka RAM) in a Dell Latitude D830 notebook. Also, these instructions should work for a Dell Latitude D820 notebooks and maybe some other models. Please mention you notebook model in the comments if this guide works for you.
You can check the amount of installed memory in the BIOS setup menu. As you see, in my laptop I have 1024MB (or 1GB) memory installed.
Dell Latitude D830 notebook requires DDR2 memory modules. You should use PC2-5300 SODIMM memory which runs at 667MHz.You can use same memory type for a Latitude D820 notebook too.
Dell Latitude D820/D830 can take up to 4GB memory total. You can install up to 2GB memory in each slot (there are two slots available).

In this guide I explain how to remove and replace the motherboard in a Dell Latitude D500 laptop. Also, you’ll see how to access and replace all other internal parts in this laptop.
I had two different problems with the laptop.
1. The power jack was damaged. I could have just resoldered the jack but the second problem was more serious.
2. The motherboard couldn’t charge a known good battery. Apparently it had a problem with the battery charging circuit.
So I decided to replace the motherboard.

In the following guide I will be removing the keyboard from a Gateway MT6704 (Model MA7) laptop. I believe this guide will work for many other Gateway laptops. Take a look at the sticker on the bottom of your laptop. If you can see Model MA7 under the Gateway logo, most likely you can use this guide.
First of all, turn off the laptop, unplug the AC power adapter and remove the battery.
Now remove covers from the wireless card and memory. I mentioned the hard drive cover, but I’m not going to remove it.