In the following guide I’ll be taking apart a Gateway P-series laptop.
In my case I’m taking apart a Gateway P-6825 but the guide should work for the entire P-series line.
If it fits any other Gateway model, please mention the model number in comments after this post.
In this guide I explain how to replace the cooling fan assembly in an IBMÂ ThinkPad T43 laptop. This laptop was starting up with a “Fan error” message indicating the cooling fan failure. The fan is a part of the heat sink assembly and when the fan fails, the whole cooling assembly has to be replaced.
Also you can use this guide for removing and replacing the keyboard and hidden memory module.
In this post I explain how to replace a noisy or failed cooling fan in a Lenovo ThinkPad T61 laptop.
This guide might work for some other Lenovo ThinkPad models. If it works for you, please mention the laptop model number in the comments after the post.
The cooling fan is a part of the heat sink assembly. If the cooling fan fails, the whole heat sink assembly has to be replaced.
It’s possible that you can separate the fan from the heat sink and replace it separately, but in this guide I’m replacing the whole assembly.
Let’s remove the cooling fan assembly and replace it with a new one.
In this guide I explain how to disassemble a Gateway MX (Model #MA2A) series laptop. To be precise, I’m taking apart a Gateway MX6650 laptop. If this guide works for your Gateway laptop, please mention the model number in the comment below.
The main purpose of this repair is replacing the laptop base cover. A piece of the base assembly where the right hinge connected broke off and the whole base assembly has to be replaced.
In this guide I explain how to disassemble a Compaq Presario v6000 series laptop.
Most likely this guide will work for some other Compaq Presario models. If it works for you, please mention the laptop model number in the comments after the article.
By the way, some Compaq Presario v6000 laptops might have a know problem with the motherboard. Check out this article about HP/Compaq Limited Warranty Service Enhancement program.
Let’s disassemble this laptop step-by-step.
In this guide I explain how to disassemble an HP Pavilion dv7 notebook.
To be precise, I’m taking apart an HP Pavilion dv7t-1000 notebook but you should be able to use these instructions for all models in the Pavilion dv7 line.
The guide will show how to access both memory modules and hard drives if you are upgrading the notebook, remove most internal components, access and clean the cooling fan.
In the following guide I explain how to disassemble HP Pavilion dv6500, dv6600, dv6700, dv6800 notebooks. In this particular case I’m taking apart an HP Pavilion dv6700 notebook.
I believe this guide will work for some other models in the Pavilion dv6000 line.
You can use these instructions for removing and replacing all main notebook components.
In the following guide I remove the motherboard from a Compaq Presario CQ50 laptop. Also this guide should work for Compaq Presario CQ 60/CQ70 and HP G50/G60/G70 laptops.
If you need replacement parts, you can find them here. Just search by the part name and laptop model.
In this guide I explain how to clean or replace the cooling fan assembly in a Dell XPS M1530 laptop. The cooling fan can be accessed from the door on the bottom of the laptop and replacing/cleaning procedure takes only about 10 minutes.
I’m taking this XPS M1530 laptop apart because the cooling fan started making noise and laptop shuts off on its own when hot. I will replace the fan, clean the heat sink and apply fresh thermal grease on the CPU and video chip.
In this guide I will be taking apart a Sony Vaio VGN-SZ series laptop. In my case I’m working with a Sony Vaio VGN-SZ330p laptop but the guide should work for the entire VGN-SZ line.
Home