Replacing failed trackpad on MacBook Air

posted in: Apple Products | 0

MacBook Air trackpad replacement

In this guide I show how to replace failed trackpad on a MacBook Air 13-inch or 11-inch laptop.

In my case the trackpad started working erratically. The cursor was jumping all over the screen and moving on its own even if the trackpad wasn’t touched.

TIP: if your trackpad stopped clicking, check the battery. It’s likely the battery is swollen and blocking the trackpad from moving freely. If the trackpad clicks properly with the battery removed, you’ll have to replace the battery.


How to replace 13″ MacBook Air cracked screen

posted in: Apple Products | 0

Replacing cracked screen on 13-inch MacBook Air laptop

Today I’ll be replacing cracked screen on a 13-inch MacBook Air. This laptop was dropped and the screen got messed up. The left side of the screen still displays normally but the right side shows only bleeding colors.

You can use this guide for replacing damaged display assembly on any 13-inch MacBook Air produced in 2013, 2014, 2015 and 2017.

We’ll be removing some internal components and screws so be organized, make notes. Keep track of the screws.


13″ MacBook Pro Retina – fixing no video issue by replacing display cable

posted in: Apple Products | 12

13 MacBook Pro Retina laptop

In this guide I will be fixing a 13″ MacBook Pro Retina laptop with “no video” issue by replacing the display LVDS cable. In this particular guide I’m fixing a Late 2013 model but all disassembly steps should be the same for 2014 and 2015 MacBook Pro Retina models.

I received this laptop with the following problem description: It turns on and chimes but has no video and no backlight. Video still works on the external monitor connected via Thunderbolt or HDMI ports.


How to replace thermal grease on MacBook Pro

posted in: Apple Products | 5

MacBook Pro bottom cover removed

In this guide I explain how to replace thermal grease on a MacBook Pro.

You can use the following instructions for 13″, 15″, 17″ unibody MBPs.

When you remove the bottom cover you can access and clean up the cooling fan but the heat sink is mounted on the other side of the motherboard. In order to replace thermal grease the motherboard has to be removed.